tag:blogger.com,1999:blog-5716267876695045452024-03-13T05:15:57.698-07:00Earthworks Climbing SchoolMatthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.comBlogger17125tag:blogger.com,1999:blog-571626787669504545.post-13642990384881352862011-11-11T22:12:00.000-08:002011-11-11T22:19:30.199-08:00Tyrolean TraverseMy preferred set-up for a tyrolean traverse includes:<br />-Petzl Tandem Pulley on the bottom <span style="font-size:100%;"><br />-Petzl Mini Traxion on top, for progress capture<br /><br /></span><a href="http://1.bp.blogspot.com/-6uSiBYFJEc8/Tr4O3JegOyI/AAAAAAAAAFY/33erWXmf-xE/s1600/TyroleanSetup_01.jpg"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 400px; height: 266px;" src="http://1.bp.blogspot.com/-6uSiBYFJEc8/Tr4O3JegOyI/AAAAAAAAAFY/33erWXmf-xE/s400/TyroleanSetup_01.jpg" alt="" id="BLOGGER_PHOTO_ID_5673988921132858146" border="0" /></a><span style="font-size:100%;"><br />For heavier climbers, climbers with a backpack, and long traverses, I add a chest harness to the system (the BD Vario Chest is excellent--in this photo we've improvised with a sewn runner)</span>:<br /><p><a href="http://2.bp.blogspot.com/-J52A9eSKV1E/Tr4PAiF3aMI/AAAAAAAAAFk/jfItixwxRpQ/s1600/TyroleanSetup_03.jpg"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 400px; height: 266px;" src="http://2.bp.blogspot.com/-J52A9eSKV1E/Tr4PAiF3aMI/AAAAAAAAAFk/jfItixwxRpQ/s400/TyroleanSetup_03.jpg" alt="" id="BLOGGER_PHOTO_ID_5673989082359228610" border="0" /></a></p><p><br /></p><br /><span style="font-size:100%;"><br /></span><h3 style="font-weight: normal;"></h3>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-49132005373566390112011-11-11T21:48:00.000-08:002011-11-11T22:11:38.265-08:00Top Rope SoloingMy preferred device for top-rope solo climbing is the Petzl Mini Traxion, used with an anti-cross-loading carabiner <span style="text-decoration: underline;">:<br /></span><a href="http://4.bp.blogspot.com/-64Xfwpkei1c/Tr4K3nQla3I/AAAAAAAAAFM/XhSslDcQ9Jc/s1600/MiniTraxion.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 351px; height: 323px;" src="http://4.bp.blogspot.com/-64Xfwpkei1c/Tr4K3nQla3I/AAAAAAAAAFM/XhSslDcQ9Jc/s400/MiniTraxion.jpg" alt="" id="BLOGGER_PHOTO_ID_5673984531081030514" border="0" /></a><br /><br />Here is my basic anchor setup (note that the end of the climbing rope is weighted and that a second strand of rope is used as a back-up and a rappel line):<span style="text-decoration: underline;"><br /></span><a href="http://1.bp.blogspot.com/-RHIrzYlwD1Q/Tr4J4Lw0yRI/AAAAAAAAAFA/2tqnAh0Wrqw/s1600/TopRopeSoloing_02b.jpg"><img style="display: block; margin: 0px auto 10px; text-align: center; cursor: pointer; width: 358px; height: 502px;" src="http://1.bp.blogspot.com/-RHIrzYlwD1Q/Tr4J4Lw0yRI/AAAAAAAAAFA/2tqnAh0Wrqw/s400/TopRopeSoloing_02b.jpg" alt="" id="BLOGGER_PHOTO_ID_5673983441368303890" border="0" /></a><br /><br />The system at work:<span style="text-decoration: underline;"></span><br /><iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.blogger.com/video.g?token=AD6v5dxsJWL027JkvtEHVfn9tqOg4Z_n0DeCcBTXEQeDLEJYl3GBeE0OgWcnuN4gAcrIBehNVGqGi4G6BkzLWWbygg' class='b-hbp-video b-uploaded' frameborder='0'></iframe>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-68261412422495647222010-07-02T22:09:00.000-07:002010-07-02T22:14:54.244-07:00Dyneema & Nylon Drop TestsJaw-dropping tests results and outstanding analysis from the folks at DMM:<br /><ul><li><a href="http://www.dmmclimbing.com/video.asp?id=5">Dyneema & Nylon Drop Tests</a><br /></li></ul>The take-home is that climbers need to use extra caution whenever clipping to an anchor using a sewn-nylon or -Dyneema sling. A short fall using either material will produce extremely high forces.Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-87572898379482647892010-04-21T21:53:00.000-07:002010-04-21T22:12:00.838-07:00What is a BHK?The <span style="font-style: italic;">BHK</span>, or "Big Honkin' Knot," is a simple way to make a redundant Masterpoint using two arms of an anchor cord. I have seen the <span style="font-style: italic;">BHK</span> advocated by both the <span style="font-style: italic;">Professional Climbing Instructor's Association</span> and the <span style="font-style: italic;">American Mountain Guides Association</span> in their Top-Rope Instructor and Single Pitch Instructor courses.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_EJsHt7_qYFo/S8_XhAHKruI/AAAAAAAAAEQ/hcmcj6n3ZZY/s1600/BHK.jpg"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 298px; height: 597px;" src="http://4.bp.blogspot.com/_EJsHt7_qYFo/S8_XhAHKruI/AAAAAAAAAEQ/hcmcj6n3ZZY/s400/BHK.jpg" alt="" id="BLOGGER_PHOTO_ID_5462821834989416162" border="0" /></a><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br />As visible in the images above, there is a vestigial loop that sticks out of the back of the Masterpoint, as a artifact of making the Masterpoint redundant.<br /><br />Another option for making a redundant Masterpoint (and the option that I use 99% of the time), is to slip 4 feet of 1-inch tubular webbing over the anchor cord and then to fully incorporate the webbing into the Masterpoint. As long as the webbing sticks out of the knot on both sides, the resulting loop is redundant. It is possible to slide the webbing around, placing it wherever it is needed on the anchor cord. I have also found that this protective sheath on the Masterpoint also preserves the anchor cord, enabling it to last longer before wearing out.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_EJsHt7_qYFo/S8_YlD3lERI/AAAAAAAAAEY/JBMy1BrbPtg/s1600/WebbingMasterpoint.jpg"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 296px; height: 406px;" src="http://3.bp.blogspot.com/_EJsHt7_qYFo/S8_YlD3lERI/AAAAAAAAAEY/JBMy1BrbPtg/s400/WebbingMasterpoint.jpg" alt="" id="BLOGGER_PHOTO_ID_5462823004228882706" border="0" /></a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-62168353327084508362010-04-09T10:27:00.000-07:002010-04-09T10:51:26.984-07:00The J-Tree $Money$ AnchorIt is currently high season in Joshua Tree, and I have been getting lots of inquiries about the best way to build top-rope anchors in the Park. Anyone who has been to J-Tree before knows that there is a near absence of fixed protection and that gear placements and natural anchors are often located well back from the edge of the cliff.<br /><br />My basic J-Tree Anchor-Building <span style="font-style: italic;">Tool Kit</span> includes:<br /><ul><li>50-80 feet of 10mm anchor cord</li><li>1 cordelette (24 feet of 7mm nylon cord, tied into a continuous loop)</li><li>2 double shoulder-length sewn runners</li><li>3 miscellaneous carabiners</li><li>3 non-locking oval carabiners, used for the masterpoint<br /></li></ul><br />The following diagram shows the basic anchor set-up that I use for most routes. Following the diagram is a series of steps that represent my usual work-flow when approaching top-rope anchor building in J-Tree. This system applies to more than 90% of the top-rope anchors that I build.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_EJsHt7_qYFo/S79oVRbu2cI/AAAAAAAAAEI/TFbjmQK1n8s/s1600/MoneyAnchor3.jpg"><img style="margin: 0pt 10px 10px 0pt; float: left; cursor: pointer; width: 370px; height: 485px;" src="http://1.bp.blogspot.com/_EJsHt7_qYFo/S79oVRbu2cI/AAAAAAAAAEI/TFbjmQK1n8s/s400/MoneyAnchor3.jpg" alt="" id="BLOGGER_PHOTO_ID_5458195988062591426" border="0" /></a><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><ol><li>Create a solid, multi-point anchor that is located a comfortable distance back from the top of the cliff. In many cases, available protection is 10-30 feet back from the top of the route.</li><li>Clip the end of a 10-11mm <span style="font-style: italic;">anchor cord</span> to your multi-point anchor. (If necessary, it is possible to use a klemheist or rappel device on the anchor cord to protect yourself as you approach the edge of the cliff.)</li><li>Using a "BHK," tie the <span style="font-style: italic;">masterpoint</span> at the desired point on the anchor cord (and at the desired location at the top of the climbing route).</li><li>Place one more piece of protection near the cliff's edge. Be thoughtful about the location of this piece, as its main function will be to keep the masterpoint in the location that you have selected. Clip the anchor cord to this piece of protection using a <span style="font-style: italic;">clove hitch</span>. The clove hitch will allow you to micro-adjust the position of the masterpoint (shorten the strand of anchor cord to draw the masterpoint closer; lengthen the strand of anchor cord in order to move the masterpoint father from the piece).<br /></li></ol>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-45694539581176442152009-09-10T09:31:00.000-07:002009-09-11T05:29:33.875-07:00Spectra & "Tech Cords" versus Old-School NylonImportant information about Spectra and other high-tech cords--things are not as they seem. If you use any of these small-diameter, high strength materials in your climbing practice, this is must-read information:<br /><ul><li><a href="http://www.blogger.com/www.xmission.com/%7Etmoyer/testing/High_Strength_Cord.pdf">Comparative Testing of High Strength Cords</a>, by Tom Moyer</li></ul><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://1.bp.blogspot.com/_EJsHt7_qYFo/SqkrwVkEOSI/AAAAAAAAADo/ye-77oXnVKU/s1600-h/AnchorCordComparison.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 400px; height: 272px;" src="http://1.bp.blogspot.com/_EJsHt7_qYFo/SqkrwVkEOSI/AAAAAAAAADo/ye-77oXnVKU/s400/AnchorCordComparison.jpg" alt="" id="BLOGGER_PHOTO_ID_5379879339292899618" border="0" /></a><br /><cite><span style="font-style: italic;"><br /><br /></span></cite>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-51049765737624111502009-09-10T08:08:00.000-07:002009-09-10T08:20:45.471-07:00Use & Abuse of the Clove HitchThe AMGA, with the help of Blue Water Ropes, has done some excellent research on the use of the clove hitch:<br /><ul><li><a href="http://guidetricksforclimbers.com/cloveHitch.art.html">Use and Abuse of the Clove Hitch</a>, by Robert SP Parker</li></ul><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://3.bp.blogspot.com/_EJsHt7_qYFo/SqkZMVO2g4I/AAAAAAAAADg/CAutVLyVkyo/s1600-h/CloveHitch.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 400px; height: 266px;" src="http://3.bp.blogspot.com/_EJsHt7_qYFo/SqkZMVO2g4I/AAAAAAAAADg/CAutVLyVkyo/s400/CloveHitch.jpg" alt="" id="BLOGGER_PHOTO_ID_5379858929519330178" border="0" /></a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-446376718917364182009-09-03T14:00:00.000-07:002009-09-03T14:13:35.131-07:00Beginners & the Gri-Gri - from the AMGAFrom the Summer 2009 issue of <span style="font-style: italic;">Mountain Bulletin</span>, the quarterly newsletter of the American Mountain Guides Association:<br /><br />"Put [the Gri-Gri] in the hands of a lighter, less experienced belayer, add a pair of gloves and you have a recipe for pushing hard on a rock climb with a high level of confidence that you will not be dropped."<br /> --Rob Hess, AMGA Technical Director<br /><br /><br />This is a surprisingly strong endorsement of the Gri-Gri for use with beginners.Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com1tag:blogger.com,1999:blog-571626787669504545.post-1124936869570438302009-07-07T21:22:00.000-07:002009-07-08T12:39:51.785-07:00Lead Belay with Gri-Gri & Cinch<span style="font-style: italic;">Gri-Gri</span>s have been a common sight at local crags for many years. The "auto-locking" characteristic of the device offers an excellent back-up to the belayer's brake-hand and also takes some pressure off of the belayer during hang-dogging sessions. A few years ago, Trango released a capable competitor to the <span style="font-style: italic;">Gri-Gri</span>, called the <span style="font-style: italic;">Cinch</span>. One of the few drawbacks of these devices is the propensity to lock-up just as the belayer is trying to quickly give out slack during a lead belay. In many instances, belayers feel forced to let go of the brake-end of the rope in order to unlock the device and feed out rope.<br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_EJsHt7_qYFo/SlQj7z-w7aI/AAAAAAAAADQ/qJpukysymnk/s1600-h/BadGriGri.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 158px; height: 200px;" src="http://2.bp.blogspot.com/_EJsHt7_qYFo/SlQj7z-w7aI/AAAAAAAAADQ/qJpukysymnk/s200/BadGriGri.jpg" alt="" id="BLOGGER_PHOTO_ID_5355945367323078050" border="0" /></a>Both Petzl and Trango recently released revised instructions for belaying a lead climber with the devices. Both techniques greatly enhance the effectiveness of a lead belay, making the devices even more valuable as primary belay tools.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_EJsHt7_qYFo/SlQjtNZ_8RI/AAAAAAAAADI/B5wN-C7K3pc/s1600-h/MechAssist_LeadBelay2b.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 400px; height: 298px;" src="http://2.bp.blogspot.com/_EJsHt7_qYFo/SlQjtNZ_8RI/AAAAAAAAADI/B5wN-C7K3pc/s400/MechAssist_LeadBelay2b.jpg" alt="" id="BLOGGER_PHOTO_ID_5355945116450156818" border="0" /></a><br />To download more detailed instructions from each manufacturer, click: <a href="http://www.petzl.com/files/all/en/activities/sport/tech-tips-sport-climbing.pdf">Petzl</a> & <a href="http://www.trango.com/pdfs/CinchInstructions.pdf">Trango</a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-76614051934457823512009-07-01T12:48:00.000-07:002010-03-11T22:23:37.546-08:00No Such Thing as a "Beginner's Belay Device"I often hear climbers (including some guides and climbing gym owners) criticize mechanical-assist belay devices such as the Petzl <span style="font-style: italic;">Gri-Gri</span> and the Trango <span style="font-style: italic;">Cinch</span>. One local climbing gym, here in Southern California, completely bans their use. Many people seem to regard <span style="font-style: italic;">Gri-Gri</span>s, and similar devices, as only being appropriate for "experts." In contrast, tube-style belay devices (like the <span style="font-style: italic;">ATC</span> and the Trango <span style="font-style: italic;">Pyramid</span>) seem to be the standard choice for use when teaching belay technique.<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_EJsHt7_qYFo/SkvF1YFr9XI/AAAAAAAAACY/3pH7l1BP1do/s1600-h/BelayDevices.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 400px; height: 245px;" src="http://2.bp.blogspot.com/_EJsHt7_qYFo/SkvF1YFr9XI/AAAAAAAAACY/3pH7l1BP1do/s400/BelayDevices.jpg" alt="" id="BLOGGER_PHOTO_ID_5353590102850008434" border="0" /></a><br /><br />I have a very different take. First, I use the <span style="font-style: italic;">Gri-Gri</span> or the <span style="font-style: italic;">Cinch</span> every single day that I am in the field. Second, I allow climbers of every experience-level to belay with the devices (and I actually expect most clients to belay my lead climbs with the <span style="font-style: italic;">Cinch</span> exclusively). To be clear, I am not saying that the <span style="font-style: italic;">Gri-Gri</span> and <span style="font-style: italic;">Cinch</span> are beginner's devices. My take is that NO belay device is a beginner's tool. Where beginner's are belaying, certain precautions must be taken, regardless of the device that is in use.<br /><br />To take a step back for a moment, I want to discuss the usual criticism of the <span style="font-style: italic;">Gri-Gri</span>, and similar devices in more detail. The usual criticism has two different facets:<br /><ol><li>Mechanical-assist devices are counter-intuitive--when lowering a climber, the belayer <span style="color: rgb(51, 0, 153);">pulls back</span> on the handle <span style="color: rgb(51, 0, 153);">to initiate movement</span>; the belayer <span style="color: rgb(153, 0, 0);">releases</span><span style="font-weight: bold;"> </span>the handle <span><span style="color: rgb(153, 0, 0);">to stop</span> </span>the climber. Intuition, and experience belaying with a tube-style device, indicate that <span style="font-style: italic;">pulling back should stop</span> a climber.</li><li>The increased complexity of mechanical-assist devices increases the risk of human-error.</li></ol>To quickly dispense with the second point, I have not seen any evidence in the various annals of accident reporting which indicate that <span style="font-style: italic;">Gri-Gri</span>s contribute to more accidents or to a higher likelihood of accidents than any other belay device. I can site examples of belay-failures involving both mechanical-assist devices and tube-style devices.<br /><br />In response to the first point, my feeling is that <span style="font-weight: bold;">belaying is counterintuitive</span>; the mechanical complexity of the act of belaying, in general, lends itself to human error; only expert belayers should ever be trusted to belay without using a reliable back-up. I hold these assertions to be true for every belay technique and every belay device.<br /><br />A case in point is an accident that happened here on the central coast in 2008. An inexperienced belayer was belaying an experienced climber up a 5.11 sport climb, using a tube-style belay device. Without any warning, the climber fell from a point 60 feet up on the route. At the time of the fall, the belayer was situated with both the guide-hand and the brake-hand out in front of the device (the break hand was NOT in the brake position). As the climber's weight came onto the rope, the belayer's intuition was NOT to pull down on the brake hand, applying friction to the rope and locking the tube-style device. Instead the belayer's intuition was to grip the rope as tightly as possible with both hands in their current orientations (out in front). The belayer gripped the rope and never applied the brake. Miraculously, the belayer arrested the fall after 40 feet of rope fed through the device. Very sadly, the rope did serious damage to both of the belayer's hands (and <span style="font-style: italic;">permanent nerve damage</span> to the belayer's guide-hand).<br /><br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_EJsHt7_qYFo/SkvGS9Oz8TI/AAAAAAAAACw/WHG5nv2DySk/s1600-h/BelayFailure.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 400px; height: 286px;" src="http://4.bp.blogspot.com/_EJsHt7_qYFo/SkvGS9Oz8TI/AAAAAAAAACw/WHG5nv2DySk/s400/BelayFailure.jpg" alt="" id="BLOGGER_PHOTO_ID_5353590611036598578" border="0" /></a><br />In this photo, you can see the damage done to the belayer's hands. The belayer is right-handed, thus the brake-hand (the right hand) is seen on the left side of this photo. Interestingly, the brake hand suffered less damage than the guide-hand.<br /><br />The most perverse aspect of this story is that the belayer, who will not climb to this day, blames herself for the accident. She feels that she nearly killed her climbing partner. In truth, she did not need to be placed in this position in the first place--there are basic tools and techniques which would have averted the accident.<br /><br />The most important lesson that can be learned from this case is : <span style="font-weight: bold;">always use reliable back-ups</span> to the belayer. Reliable back-ups include a <span style="font-style: italic;">back-up</span><span style="font-style: italic;"> belayer</span> who attentively holds the break-end of the rope, blocking knots in the brake-end of the rope, and mechanical-assist belay devices like the <span style="font-style: italic;">Gri-Gri</span>. In this situation, it is very likely that the injuries suffered by the belayer would have been avoided had she been using any one of these three back-ups.<br /><br />As I mentioned earlier, my own practice includes the careful use of the <span style="font-style: italic;">Gri-Gri</span> and the <span style="font-style: italic;">Cinch</span>. I have found the <span style="font-style: italic;">Cinch</span> to be the most effective and reliable device for belaying a lead climber. The technique for belaying a lead is somewhat complex but can be taught to most people. Click <a href="http://www.trango.com/pdfs/CinchInstructions.pdf">here</a> to see how. I tend to use the <span style="font-style: italic;">Gri-Gri</span> extensively for belaying re-directed top-ropes; although, I use extra precautions to avoid accidents while lowering with the devices (I routinely use a back-up belayer and/or blocking knots on the brake-end of the rope to ensure a safe lower). When I am climbing with only one other person and need to be lowered by that person, I place a klemheist on the belayer's end of the rope and attach this to my harness. I then push the klemheist down the rope as I am being lowered.<br /><br />The take-home point is that the <span style="font-style: italic;">Gri-Gri</span> is no more or less safe than any other device. Belaying, in general, is a difficult job with very severe consequences. The only way to ensure a safe belay is to <span style="font-weight: bold;">back up your belay.</span><br /><span style="font-style: italic;"></span>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-79704610703245417992009-04-21T11:01:00.000-07:002009-04-21T15:49:24.937-07:00Extending the Cordellete<a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://2.bp.blogspot.com/_EJsHt7_qYFo/Se4OammnmpI/AAAAAAAAACQ/QlK84VVDEGI/s1600-h/Anchors_3%265.jpg"><img style="margin: 0pt 0pt 10px 10px; float: right; cursor: pointer; width: 400px; height: 272px;" src="http://2.bp.blogspot.com/_EJsHt7_qYFo/Se4OammnmpI/AAAAAAAAACQ/QlK84VVDEGI/s400/Anchors_3%265.jpg" alt="" id="BLOGGER_PHOTO_ID_5327211259427789458" border="0" /></a><br /><br /><br />The <span style="font-style: italic;">cordelette</span> (a continuous loop of 7mm nylon cord) continues to be one of the very best tools for building full-strength, redundant anchors. The vast majority of the anchors that I build use the so-called <span style="font-style: italic;">cordelette method</span>, whether they are 2-point anchors or 5-point anchors.<br /><span style="text-decoration: underline;"><br /><br /></span>One of the challenges with a cordellete is that its length (usually about 8-10 feet once tied into a loop) can prove to be limiting. A cool trick that I learned not long ago is to use knots to effectively lengthen the cordelette. Study this diagram to see what I mean:<br /><a onblur="try {parent.deselectBloggerImageGracefully();} catch(e) {}" href="http://4.bp.blogspot.com/_EJsHt7_qYFo/Se4N4q_ppoI/AAAAAAAAACA/sUXJTOq1Z5o/s1600-h/ExtendedCordelette_02b.jpg"><img style="margin: 0px auto 10px; display: block; text-align: center; cursor: pointer; width: 400px; height: 300px;" src="http://4.bp.blogspot.com/_EJsHt7_qYFo/Se4N4q_ppoI/AAAAAAAAACA/sUXJTOq1Z5o/s400/ExtendedCordelette_02b.jpg" alt="" id="BLOGGER_PHOTO_ID_5327210676490970754" border="0" /></a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-51198904948846035882009-04-16T22:51:00.001-07:002012-02-29T21:21:56.154-08:00Misuse of the Daisy ChainThought-provoking video from Black Diamond:<br /><ul><li><a href="http://www.blackdiamondequipment.com/videos/daisy.html">Clipping In Short with Your Daisy Chain</a>, by Kolin Powick & Brett Keyes<span style="font-family:Verdana, Arial, Helvetica, sans-serif;font-size:85%;"><em></em></span> </li></ul><iframe allowfullscreen='allowfullscreen' webkitallowfullscreen='webkitallowfullscreen' mozallowfullscreen='mozallowfullscreen' width='320' height='266' src='https://www.blogger.com/video.g?token=AD6v5dwF2dSe8eofg4ViICJqtWigFj_qOgahPiBLEg7giLFcbfbUlnictrZ9VbsdT9MfVbwjAUy5RCBot-8OFv0xbQ' class='b-hbp-video b-uploaded' frameborder='0'></iframe>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-32639460461717453352009-04-13T11:25:00.001-07:002009-04-13T11:40:16.734-07:00Bolt FailureWhen I give anchor clinics at Gear Shops and Climbing Gyms, I always get the very logical question:<br /><ul><li>If bolts are so unreliable, why aren't bolts failing left and right?</li></ul>A single crag in Santa Barbara has actually had two different bolts pull out during lead falls (most recently in <a href="http://mountainproject.com/v/california/central_coast/santa_barbara/105797388">Summer 2007</a>). Both cases involved 5-piece Rawls, which are considered better than most other bolts in softer rocks.<br /><br />And then this in Australia: <a href="http://www.onsight.com.au/news-blog/articles/36/nicks-accident-what-happened">bolt failure in the Blue Mountains</a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-89628477095546096902009-04-12T13:38:00.000-07:002009-04-12T13:42:08.277-07:00Heavier Climbers = Bigger ForcesExcellent work by Chuck Weber, Quality Manager of PMI Ropes. I found this particularly relevant given my 195 pounds.<br /><br /><a href="http://www.safeclimbing.org/education/Heavy_Climbers_Beware.pdf">What Heavier Climbers Need to Know</a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-29672654368759176452009-04-10T22:30:00.000-07:002012-11-27T19:35:22.180-08:00The Verdict on BoltsWay back in 1992, Duane Raleigh did an excellent study of different types of climbing bolts for <span style="font-style: italic;">Climbing Magazine</span>. What I particularly like about Duane Raleigh's methodology is that he tried to simulate different hardnesses of rock in order to see how different bolts would perform in different rock types. The verdict that Duane Raleigh rendered is simply stunning. It turns out that even the biggest, strongest bolts are only as good as the rock that you put them in.<br />
<br />
<a href="http://mountainproject.com/images/17/58/106401758_large_a50491.jpg" target="_blank">"Anchors Away - the Nuts of Bolts." by Duane Raleigh. <i>Climbing Magazine. October, 1992.</i> </a><br />
<br />
After reading Duane Raleigh's study several years ago, the thought occurred to me - if the numbers that were recorded in the study are to be believed, then I should be able to walk over to almost any crag in the Santa Barbara and Ojai areas and simply and easily pull bolts out of the wall. The first bolt that I looked at was a bolt at "the Foot," in Ojai. On a cool winter day in 2004, I placed the nail-remover of a small household hammer beneath the hanger of a bolt atop that cliff. I never put more than moderate pressure on the hammer...the <a href="http://earthworks.smugmug.com/gallery/3791760_6SX9q#218731063_Utxws">results</a> sickened me. Five years and dozens of bolts later, I continue to be amazed at how poorly most bolts hold in the walls of our local crags.<br />
<br />
More about bolts from Duane Raleigh: "<a href="http://www.safeclimbing.org/education/mechbolts.htm">Mechanical Bolts"</a>Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-8373285269583509492009-04-10T21:51:00.000-07:002009-04-11T16:48:33.827-07:00Fixed on BoltsCrags on the Central Coast of California are littered with several generations of various types of bolts. One or two walls in particular could be described as a veritable museum of climbing bolts. Knowing what is good and what is sketchy can be more challenging than the crux mantle on <span style="font-style: italic;">T-Crack</span>.<br /><br />Bolts can generally be separated into three different categories based upon how they work. These three categories are: compression bolts, expansion bolts, and glue-ins.<br /><br /><span style="font-weight: bold;">Compression Bolts</span><br />These bolts are larger than the drilled diameter of the hole into which they are placed. They are forcibly hammered into the hole causing the shaft of the bolt to deform and compress. The bolt then springs back elastically and thereby grips the rock. Many compression bolts have an obvious striking service which is visible after placement. Those with a rounded striking service are referred to as “<a href="http://mountainproject.com/v/matthew_fienup/106201776">button heads</a>.” Compression bolts are extremely sensitive to the shape of the bolt hole. Functionally, pitons are actually a close relative of compression bolts.<br /><br /><span style="font-weight: bold;">Expansion Bolts</span><br />SLEEVE BOLTS<br />These bolts are tapped into a hole and tightened down with a wrench. As the bolt is tightened, a tapered cone (or “gumdrop”) is drawn up into an expansion sleeve causing the bolt to expand. Be careful as there are three types of sleeve bolts. The type with solid hex-shaped heads, often referred to as "<a href="http://fixeusa.com/rawl_5-piece_bolts.htm">Rawls</a>," are among the strongest and most reliable bolts in medium to hard rock. There are two different types of sleeve bolts that have an exposed, threaded end that sticks out of the hole. One of these is the <a href="http://earthworks.smugmug.com/gallery/3791760_6SX9q#218731139_xg7p4">externally-threaded sleeve bolt</a>, a hardware store variety that is weak and unreliable. The other is the<a href="http://fixeusa.com/triplex_3-piece_removable_bolt.htm"> Fixe Triplex</a> bolt, which is one of the best choices for softer rocks.<br /><br />WEDGE BOLTS<br />These bolts have a flared bottom-end of the bolt with an expansion clip. They are among the most common bolts in rock climbing. Placement of wedge bolts is hard to botch and they are even self-tightening when placed in solid rock—they expand further and further as they are drawn out of the hole. Be careful as <a href="http://fixeusa.com/wedge_bolts.htm">wedge bolts</a> are unreliable in medium and soft rock. There are also hardware-store wedge bolts that are considerably weaker than climbing-specific ones.<br /><span style="font-weight: bold;"><br />Glue-In Bolts</span><br /><a href="http://www.safeclimbing.org/education/adhesivebolts.htm">Glue-in bolts</a> are molecularly bonded to the rock. This gives them the highest strength of all three types. They are also reliable in medium and soft rock; however, they require delicate skill to place properly.<br /><br /><br />Next time you're at the crag, look closely at the various bolts that you are clipping. Study them. Begin to make educated guesses about how each one works. Try to get proficient at identifying each type...as you'll learn, your livelihood may depend upon that proficiency.Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0tag:blogger.com,1999:blog-571626787669504545.post-76719721853532834012009-04-10T12:52:00.000-07:002009-04-21T15:53:12.252-07:00How STRONG?The setting of safe and reliable anchors is one of the most fundamental skills in climbing. Yet few concrete rules-of-thumb exist for determining what is <span style="font-style: italic;">enough</span> protection. Abstract ideas, intuition, and even superstition often stand in lieu of hard numbers.<br /><br /><span style="font-weight: bold;"> So, what makes an anchor?</span><br /> How many points of protection are required?<br /> How strong does an anchor need to be?<br /><br />First, let’s consider some numbers. According to Taupin & Verdier in the French treatise <span style="font-style: italic;">Amenagement et Equipment d-un Site Naturel d’Escalade</span>, the routine forces in climbing are: 2,600 pounds for lead climbing falls and 1,000 pounds for top roping falls. Hopefully, these numbers reinforce in your mind the importance of building strong anchors...you are going to put many hundreds of pounds of force on your anchors.<br /><br /><span style="font-weight: bold;">Fortunately, the greatest possible force that you can put on an anchor is limited.</span><br /><br />To back up a step, it is important to realize that climbing ropes <span style="font-style: italic;">stretch</span>. When they stretch, climbing ropes absorb energy. When a climber falls, some of the energy created in the fall gets translated to the anchor (and to the climber) while some of the energy gets absorbed by the rope as it stretches.<br /><br />The <span style="font-style: italic;">International Mountaineering & Climbing Federation </span>(also known as the UIAA) provides standards for how much energy a climbing rope should absorb. The UIAA-assumed maximum force for UIAA-certified ropes is 12kN (about 2,700 pounds) at the tie-in point and 24kN (about 5,400 pounds) at the top anchor.<br /><br />In other words, <span style="font-weight: bold;">the maximum force that you can apply to an anchor using a climbing rope is 24kN</span>. Admittedly, heavier climbers apply more force than light climbers and the UIAA test weight is only 176 pounds. Additionally, falling repeatedly over a short period of time reduces the elasticity of the rope thereby increasing the force on an anchor with each subsequent fall. Even given these exceptions, 24kN is a very useful number.<br /><br />My standard for anchor building is this: <span style="font-weight: bold;">the best possible anchor is the one that will hold the worst possible fall</span>. <span style="font-weight: bold;">Build 24kN anchors and it is reasonable to believe that you are not going to break those anchors using a climbing rope</span>.<br /><br />How do you get to 24kN? How do you know how much force a camming device or a bolt or a natural anchor will hold? Ahh...that's a whole 'nother conversation.Matthew Fienuphttp://www.blogger.com/profile/08199166944530037959noreply@blogger.com0